Martin DMX 5.3 Splitter Instrukcja Użytkownika Pobierz pdf (Strona 5)

RUSH MH 4 Beam User Manual 5

For the latest user documentation and other information about

this and all Martin™ products, please visit the Martin website at

http://www.martin.com

Protection from electric shock

Do not expose the fixture to rain or moisture.

Shut down power to the fixture before carrying out any

installation or maintenance work and when the fixture is not in

use.

Ensure that the fixture is electrically connected to ground

(earth).

Use only a source of AC power that complies with local building

and electrical codes and has both overload and ground-fault

(earth-fault) protection.

Socket outlets or external power switches used to supply the

fixture with power must be located near the fixture and easily

accessible so that the fixture can easily be disconnected from

power.

Disconnect the fixture from AC power before removing or

installing any cover or part and when not in use.

Replace defective fuses with ones of the specified type and

rating only.

Isolate the fixture from power immediately if the power plug or

any seal, cover, cable, or other component is damaged,

defective, deformed, wet or showing signs of overheating. Do

not reapply power until repairs have been completed.

Before using the fixture, check that all power distribution

equipment and cables are in perfect condition and rated for the

current requirements of all connected devices.

Use only Neutrik PowerCon cable connectors to connect to

power sockets.

Do not connect devices to power in a chain that will exceed the

electrical ratings of any cable or connector used in the chain.

The supplied power input cable is rated 6 A and can safely

supply only one fixture with mains power. Do not connect any

device to the fixture’s MAINS OUT connector when using this

cable. If you replace this cable and also use the replacement

cable to supply only one fixture with mains power, the

1 2 3 4 5 6 7 8 9 10 ... 47 48

Brak uwag

Martin DMX 5.3 Splitter Instrukcja Użytkownika Strona 5